Spray Type Falling Film Evaporator Customized Color With Carbon Steel Shell Material

Spray-type Heat Exchanger Shell and Tube

Water Cooling Evaporator

Falling film refrigerant sprayed on the brass, the use of copper fins to produce Gerry Valley benefits.

Improve the heat transfer coefficient. Falling film type than the full liquid heat transfer efficiency,

refrigerant use less.

Falling film heat transfer efficiency is high. Falling film evaporation is flow boiling, because the outer

surface of the liquid film layer thickness is small, no hydrostatic pressure generated by the high heat

transfer coefficient.

And the full-liquid evaporation (that is, immersion evaporation) generated bubbles easily gathered in the

surface of the heat transfer tube, resulting in decreased heat transfer efficiency, the heat transfer effect

as falling film evaporation. In general, falling film evaporation is a small temperature difference, but to

prevent scaling, affecting heat transfer efficiency.

"Falling film" of a shell and tube evaporator. Its "shell" inside the refrigerant cycle, "pipe" to take the chilled

water cycle, from the profile point of view, as if there are half of the cylinder tube refrigerant, and the water

pipe bundle soaked in the refrigerant.

It is the opposite of the "dry evaporator", dry type is "pipe" to take the refrigerant, "shell" water, like the

refrigerant tube soaked in water.

HEAT EXCHANGER

CAPACITY: 100KW TO 400KW

COOPERATED CLENTS

falling film heat exchanger

falling film condenser

Spray Type Falling Film Evaporator Customized Color With Carbon Steel Shell Material Images